Thrills and Spills at the Auction – Coys at Blenheim Palace 200919 Jul

On a pleasant sunny Saturday afternoon in Oxfordshire on 18 July 2009, I experienced my first classic car auction; the Coys Fine Motor Cars and The Jaguar Legend auction at Blenheim Palace. Of particular interest to Tester Engineering was lot 658, the Jaguar E-Type we recently modified to Lightweight specification for our client Booker Motorsport.

18072009789As I entered the main marquee I was immediately greeted by ‘our’ Jaguar, gleaming in the central display. Next to it stood a lovely pale blue 1954 Jaguar XK140 Drophead Coupe and a 1989 Porsche 911 Carrara Speedster, and opposite an imposing 2008 Rolls Royce Phantom Drophead Coupe. Each car received attention, but every time I looked at the E-Type someone new was checking her out, investigating under the bonnet and in the boot and even sitting in the driver’s seat to try her out for size.

I joined the auction as lot 624 was under the hammer. I soon found it can be quite a spectator sport watching the auctioneer build up the interest in his wares, then eek out every last penny from his audience and to see discreet nods and slight waves of hands bearing numbers signifying a bid is placed.

18072009814As lot 658 was announced, I actually stopped breathing … this was it! The auctioneer gave the potential purchasers a brief synopsis of the car; how modification work had just been completed by Tester Engineering and that it had successfully gained its FIA Technical Passport. And so the bidding commenced! As with all the lots no one was willing to commit early and the auctioneer eventually got bidding started at £80,000 and then they were off. It seemed to me that there were several people in the room bidding and also someone via the telephones. The bid went up by £2,000 or so at a time and peaked at £100,000. Unfortunately on this occasion, it didn’t reach the reserve set by the client but I have learnt that in the world of the auction this isn’t the end. The offer of £100,000 can remain in play and potential buyers can come back to see the car after the auction, as happened with the E-Type when it was viewed on Sunday.

So there you have it. A Tester car has reached six figures at auction, something we are immensely proud of. The build up seemed to take forever and then our lot was over within minutes!

I’m certainly looking forward to my next visit to the auction house and one day I will be there to buy! Have you experienced the thrill of an auction?

Claire Tester

If you missed the auction and are interested in viewing this Jaguar E-Type ‘Lightweight’ please contact us.

1951 Aluminium Bodied Jaguar XK120 – ERG 51625 May

FOR SALE
1951 Aluminium Bodied Jaguar XK120 – ERG 516

Would you like to own a stunning car like this?

Tester Engineering are please to offer for sale a 1951 Jaguar XK120.  Works are currently ongoing, which means this would be an ideal moment to stake your claim on this beautiful car and incorporate your own wishes. The minimum specification we include is as follows:

 • XK120 Roadster style with all aluminium body
• Fully adjustable suspension with rose jointed Watts linkage rear suspension system
• Powerlok differential
• Chrome wire wheels and spinners
• 3.8 litre xk series engine running 45 dcoe’s producing approx 320bhp
• All synchromesh 4 speed gearbox
• Lightweight aluminium high efficiency water radiator and header tank
• Aluminium long range fuel tank and Monza filler cap
• Period leather trimmed bucket seats and dash
• Mota Lita leather rimmed steering wheel and quick release boss
• FIA approved safety harness
• 2.25L electric fire extinguisher system
• Removable rollover bar
• Free flowing tubular exhaust

Total cost £POA

Our cars can be tailored for racing or road use, but all come with Fun, Excitement and Passion as standard!  Contact Tester Engineering now to discuss this exciting opportunity.  Alternatively, if this isn’t the car you are looking for, call 01327 315048 to ask about our source and build service.

~ Please note the above picture is for reference only, LYS 818 isn’t for sale! ~

Jaguar Lightweight E-Types: Investing in the future, now and then21 May

Are you a fan of history?  Would you be happy surrounded by it day in and day out?

We love the stuff and right now are like the proverbial pigs in muck! One of our favourite cars is the Jaguar Lightweight E-Type and in particular the Briggs Cunningham cars.

tester-photos138.jpg
Jim Tester Senior, in racing overalls, in discussion with McLaren

Cunningham, an American car collector, first entered the Le Mans race in 1950 in a special-bodied Cadillac and a year later embarked on a production run of cars in his own factory to qualify as a manufacturer with the FIA. Cunningham’s best finish was fourth in 1952, while the best year for the team was 1954 when cars finished third and fifth. The last year that Cunningham’s featured at Le Mans was 1956; this was also the year that Cunningham first ran a Jaguar at Le Sarthe.

In 1960 Cunningham made an unsuccessful return to Le Mans, this time with Corvettes and one Jaguar, the E2A prototype. It was in 1963, when the iconic blue stripes appeared on three Lightweights entered by Cunningham but sadly success was still out of reach.

These three cars (5114 WK, 5115 WK and 5116 WK) have helped to shape Jim Tester as they have been a part of his life since childhood and, to come full circle, are the “muck” us pigs are surrounded by today!

In the mid 1980’s Jim Senior (in the first incarnation of Tester Engineering) worked on 5114 WK from his Scottish base. The car, then owned by Campbell McLaren, was notoriously unreliable and was re-built and run at tracks like Knockhill and Nurburgring.

tester-photos132.jpg Here’s a seven year old Jim Jnr out in the workshop learning his craft!

Today’s Tester Engineering is now recreating these beauties for a valued customer and Jim’s experience with his father is helping to make sure every detail is taken into account.  This particular car has re-built for the customer and modified to Leightweight specification with certain aluminium bodywork parts, racing suspension geometry and lightweight aluminium high efficiency water radiator and header tank .. to name but a few modifications!

Both Jim’s lost count a long time ago of all the cars they worked on and its this experience that can be yours if you bring your classic cars (be they road or race, Jim has seen them) to Tester Engineering.

150520092171.jpg Jim with 2009 recreation of the beautiful Jaguar Lightweight E-Type

pictures_from_the_past_team_tester_0101.jpg

The car we are currently building is but hours away from completion now and will then hit the track day scene to hone the ride and engine sounds.

Is this the ultimate E-Type?  Tell us what you think in the comments below!

If you’ve got a classic car that you would love to turn into your dream racer contact us at Tester Engineering on 01327 315048.

How do I get race fit? Part 213 May

Team Tester welcomes Liz Linford!

Welcome to Part 2 of our Fitness feature. Jim and Iain have been following the professional advice of Liz Linford of Body Technology, to help prepare them for the 2009 racing season.

Liz is a qualified chiropractor, therapeutic masseuse, osteopath and reflexologist. Liz also has a Bachelor of Science and a Diploma in Management of Sports Injuries and is able to give advice on exercise and diet.

As well as an impressive collection of qualifications, Liz has participated in rally driving and rally cross; has undertaken the Peruvian and Himalayan Mountain Treks in 2002 and 2003 and the London Marathon in 2004. All this, and a passion for all forms of motorsport herself, means Liz is better able to understand the needs of her patients who enter our beloved sport.

Liz has spent the last five years as the official physiotherapist for the Porsche Cup Championship and before that fulfilled the same role for TOCA looking after BTCC drivers. Liz has also helped some of motorsport’s top names including Richard Burns, Nigel Mansell, Rubens Barichello, Alistair McRae and Arron Slight. And now us!

For this month, Liz asked us to think about the liquids we consume.

“Just as an engine can’t run without oil, our engines can’t run without water; it’s needed for all bodily functions, especially elimination and to regulate body temperature.

Think back .. are you often thirsty? Feel tired? Have difficulty concentrating? Are you overheating? Have joint problems or dry lips or mouth? And next time you pop to the loo, is your urine dark yellow?! Any combination of these things could be your body crying out for water. We should all aim to drink 1.5 to 2 litres of water a day, and of course drink more if you exercise.

Next time you are reaching for a drink consider that most soft drinks are high in calories and those energy drinks that so many people consume contain caffeine, which will dilute the blood vessels, giving an instant spurt of energy but then you are tricking the body with chemicals. Fizzy drinks have had the caffeine removed allowing them to be marketed as caffeine free but this has simply been replaced with other chemicals so they have just the same effect as energy drinks. Diet or low calorie drinks provide little or no energy. Tea, coffee and alcohol all act as diuretics, causing your body to lose water as well as robbing it of natural minerals.

So remember, water is always best. If dehydration is a problem, choose an isotonic drink for energy or a hypotonic drink for rapid fluid replacement.”

Thanks Liz!

Check back in with us next month for Liz’s next Top Tip for Drivers.

If you like what you’ve read and would like more personal advice from Liz you can contact her at liz@body-technology.com(remember to tell her you met her through Tester Engineering).

How do you feel about no British Grand Prix?13 May

So Bernie has decided that Britain may well have a gap year from hosting a Grand Prix as Donington Circuit may not be ready.

This has us seething here at Team Tester.  The British Grand Prix is part and parcel of the British summer and an historical date on the Formula One calendar.  Being local to Silverstone it is sad enough that our ‘home’ circuit is losing the Grand Prix anyway, but is Bernie so desperate in his loathing of Silverstone and it’s imcumbants that he would rather there was no British Grand Prix at all than allow one more year in Northamptonshire?

There’s also British industry to think about.  Daventry and Northamptonshire is at the heart of Motorsport Valley; most of the teams are based within a 50 mile radius.  What would happen to our ecomony, which is already in and out of intensive care?

How do you feel about no British Grand Prix?  Are you a regular visitor at the main British motorsport event?  It’s an outrage to us here .. let us know your thoughts.

Check out the full story at www.crash.net/Formula+One/News/146693/1/gap_year_for_british_gp_at_donington

Claire Tester makes Silverstone debut!12 May

You’re lined up ready on the grid …

The lights go out!

You’re …running?!

On 3 June, I shall be donning my trainers to complete one lap of Silverstone’s GP circuit (3.2 miles or 5k) for Race for Life in aid of Cancer Research UK. This year we marked the 15th anniversary of the passing of Jim’s Dad from cancer and what better way to commemorate him and raise some vital funds for this incredibly worthwhile charity at the same time.

If you would like to support Cancer Research UK then please sponsor me at visit www.raceforlifesponsorme.org/testerengineering

Thank you!

Claire

Win a VIP pitpass with the Tester Engineering Team11 May

Do you love amazing classic cars, and love to see them racing as they were intended? At Team Tester were lucky enough to take care of and race alongside some of the most astonishing cars ever created.We love getting people involved in motorsport, and what better way than to be a real live member of  a race crew.

If you would like to win the chance to come along to a weekend of racing with Team Tester

To Enter:

  • Enter your email address below.
  • You will recieve a confirmation email
  • Click on the confirmation link in that email and your entered.

Silverstone Classic 2009 Press Day – Get the latest pictures09 May

Yesterday (06.05.09) Silverstone Circuit hosted the Silverstone Classic Media Test Day.  A fantastic array of cars was in attendance, including Tester’s Jaguar XK120, and those with passenger seats (and drivers that wanted to!) were able to give the media passenger rides around the 3.2 mile Historic GP circuit, to get the juicing flowing and everyone revved up for the July event.

06052009488.jpg

Team Tester’s own timing had driver Jim Tester posting about 2.27min around the track with the likes of the Aston Martin GT Prototype Project 212 car about 2.16.  However the awesome Group C cars, including the Silk Cut Jaguar XJR-9LM (winner of the 1988 Le Mans) driven by Andy Wallace, we clocked at anywhere between 1.58 and 2.03min!

Team Tester were due to give the media a thrill in the XK120 but sadly a vibration on the car meant she had to be pulled out of the rest of the day.

All that was left to do with the day was ogle the rest of the cars out on display ~ take a look at the snaps in the gallery!

We know which cars we can’t wait to see rockin’ and racin’ at the event .. how about you?

Ferrari 24605 May

Jim Tester tells all…05 May

interview_with_jim1At the end of May 2008, Jim turned 30 and celebrated the occasion by competing in his first round of the season in the Jaguar Enthusiast’s Club XK Challenge at Brands Hatch, Kent. Sadly the car didn’t make it to the end of the race; we caught up with Jim to find out why and a bit more about the man behind the company…
So, Jim, what happened at Brands Hatch?

Well, we took the car down on the Friday to test and so that I could get a feel for the circuit as it was my first time round there. The car behaved well and we got some very respectable times in. Then on the Saturday morning when we arrived at the circuit we had an oil leak, which we rectified with a minute to spare before qualifying! The first half of the session went well, the second half was dogged with yellow flags because of spinners. We got a 60.** lap in which got us third on the track. When the race came round something just didn’t feel quite right. We were held on the grid when the pole sitter stalled and couldn’t re-start his car. At the end of the first lap I’d lost about four or five places as I had no acceleration and then as I came out of Surtees corner I heard the engine go. It was hugely disappointing not to finish the race but we have to take a really good qualifying performance away as a positive and say a huge thank you to all the crew who attended and worked brilliantly together.

What’s next for the engine and car?

The engine is being rebuilt as we speak. We were really lucky in that I’d felt it go and stopped immediately so the damage is not as bad as one would think. We will get the engine done and back in the car, although I’m very sad that due to time constraints and customer’s work we have in, I probably won’t get back on the track with the XK until the 2009 season.
What happens at Tester Engineering while you are working on the XK?

Although the XK is the company’s show piece, a lot of the work done on her is in my own time so customer’s work and projects are still in progress during the working week.
Tell us a little about your background and how Tester Engineering came about..

Originally, Tester Engineering was a company my father started. He was renowned for his work and in particular with the Jaguar and XK marque. When I came along I spent every waking moment with my Dad and watched and learnt with the plan that I would work alongside him when I left school. When he passed away, instead I left Scotland, where I grew up, to work with an old family friend Malcolm Green at Mendel Autosport. Malc had taught me to weld and I worked as a fabricator with him making Formula One show cars. From there I went to work at Sporting and Historic Race Engineers, not only as a fabricator but also working on and running a variety of prestigious Ferrari’s and Aston Martin’s. We travelled all over Europe on events such as the Ferrari Challenge, Mille Miglia and the Historic Le Mans. After a family bereavement, my wife and I decided that life was too short to waste and I left S&H to set up Tester Engineering. We had talked about our own business for quite a while and took the bull by the horns and just did it! I have always wanted to start a next generation Tester Engineering and develop what my Dad had started and I’m really pleased that I have that opportunity now.

What has been the highlight of Tester Engineering so far?

I am extremely proud that customers entrust me with their cars, especially the very prestigious Aston Martin DBR1 and Ferrari P3 for example. Its also very rewarding knowing you’ve played a part, however small, in helping customers achieve their goals such as Fortec Motorsport winning two championships.

What is the future of Tester Engineering?

This year and next year will see us really pushing Tester Engineering forward. As well as continuing to work with our current customers, we are looking to expand the products we currently offer to the Formula racing; to further the historic side of the business with the re-builds and cars we have for sale and build on our customer base. We will be continuing to support our client’s and their racing and of course fit my own racing somewhere in there!

Jim TesterWe will continue in our role as industry leaders in classic car build and restoration and modern motor sport fabrication.

We will provide knowledge and skills to support the classic and modern motor sport industry and to educate and assist others passionate about classic motoring and racing.  We will always promote safety within the industry, alongside its beauty and enjoyment.

Jim Tester

Free Tester News Updates…